early a body swap with factory k frame

[TheGreatGazoo]

Hi last summer I did a gen 3 hemi in a 69 b body.
This winter I am thinking of doing a early a body. a 66 valiant my question is has anyone have any success using a factory k frame. I have been searching around and only came up with people replacing the k frame with like Alter k.
all help would be greatly appreciated

 

[CurtDawg510]

Im runnin a stock k frame and suspension on a 70 duster, if that helps out any

 

[RustyRatRod]

Grant me three wishes oh great one.

 

[TheGreatGazoo]

Im runnin a stock k frame and suspension on a 70 duster, if that helps out any

Thank you but 66 and earlier are different

 

[TheGreatGazoo]

Grant me three wishes oh great one.

Lol, I use this same screen name for all of my forums for many years now you are the first that commented and remembered him

 

[RustyRatRod]

Lol, I use this same screen name for all of my forums for many years now you are the first that commented and remembered him

Man the Flintstones is where it's at! lol

 

[AJ/FormS]

I stuffed a 340 into a 65 Valiant using 273 engine brackets on the slanty K.
I had to slightly modify the one engine bracket to take advantage of the slightly different block ears on the 340. I think it was the passenger side. The mod was to weld on a triangular piece of metal and then drill the hole in the appropriate place; easy-peasy.

 

[subcom]

This thread. There is a member that is doing it;
66 Cuda - Gen III Hemi Install

 

[AJ/FormS]

oh, sorry; I missed gen-III into the Early-A.