[WANTED] Early A Centerlink and Transmission Crossmember

[xLURKxDOGx]

Looking for one for my 63 / to 273 conversion, i also need a V8 Transmission crossmember.

Let me know,

Thanks!!!

 

[64DartGTinAZ]

You want one with disc brakes and BBP spindles already on it?

I'm in Phx, by the PVMall - PM me if interested.

 

[chryslerfat]

Looking for one for my 63 / to 273 conversion, i also need a V8 Transmission crossmember.

Let me know,

Thanks!!!

/ and V8 use the same crossmember.

 

[xLURKxDOGx]

/ and V8 use the same crossmember.

i could have thought i read that it was different because the /6 has a cutaway for single exhaust and v8 for dual?? Im looking for the Dual crossmember.

 

[xLURKxDOGx]

You want one with disc brakes and BBP spindles already on it?

I'm in Phx, by the PVMall - PM me if interested.

I have the standard 9" drums so im not sure its going to work, do you know if it will?


Jake

 

[6pk2goDemon]

Jake, Send a PM to our member cosgig. He can help you with a tranny crossmember setup for dual exhaust. You could ask him about the centerlink too. Great guy to deal with :thumbup:

http://www.forabodiesonly.com/mopar/showthread.php?t=296834

 

[cosgig]

Here's my converted crossmember for dual exhaust! $75 plus shipping if you're interested! I don't have another center link, the one I had was spoken for! Pm me if you're interested in a crossmember, I have one left! Geof

 

[xLURKxDOGx]

Jake, Send a PM to our member cosgig. He can help you with a tranny crossmember setup for dual exhaust. You could ask him about the centerlink too. Great guy to deal with :thumbup:

http://www.forabodiesonly.com/mopar/showthread.php?t=296834

Thanks!!!!

Here's my converted crossmember for dual exhaust! $75 plus shipping if you're interested! I don't have another center link, the one I had was spoken for! Pm me if you're interested in a crossmember, I have one left! Geof

Is the cutout for a 3" pipe?

Jake

 

[64DartGTinAZ]

I have the standard 9" drums so im not sure its going to work, do you know if it will?


Jake

Sorry - I just re read your post - you're looking for the transmission crossmember, not the k-frame - what I've got is a complete k-member with disc brakes and big bolt pattern spindles, V8 mount

 

[cosgig]

Thanks!!!!



Is the cutout for a 3" pipe?

Jake

No, the cutout is for 2 1/2" pipe! You will NOT get a 3" pipe to go through the torsion bar clearance hole, no matter how hard you try!!

 

[64DartGTinAZ]

BTW, cosgig's modified transmission crossmembers are really really nice...I've got one

 

[xLURKxDOGx]

Bump!!!!