[Found!] Early A splash shield -metal by strut rods

[Syleng1]

Afternoon,
Application: 1966 Barracuda
I'm looking for left and right metal splash shields that mount under the front frame rails and
look like approx 6" x 3" angle sheet metal. They attach with sheet metal bolts to the lower frame over by the strut rods. I had the car on the lift and discovered the holes for the screws but no shields. The paint was not broken so I did not install them. Need a set- I think they are the same left and right.
Thanks,
Joe

I can PayPal but need shipping to 06254 Picture is a close representation of them in plastic. I want the original metal ones.

 

[65 Dartman]

On by the 65Barracuda I parted out the right side is Totally different and it was the same on the 65 Dart I’m working on. I’ve got several of the driver’s side and will see if i have any extra for the passenger side

 

[65 Dartman]

Here’s a pic of the passenger side compared to the driver’s side

I’ve got at least 4 or 5 driver’s side and so far found just the one for my wagon for the passenger side.

 

[Syleng1]

65 Dartman,

Thanks for the pictures. Yup! those are them. If you find a set OR IF ANYONE finds a good set to sell let me know.
I appreciate the help!
Syleng1

 

[65 Dartman]

Pretty sure I have another passenger side - just got to find it. Got plenty of driver’s sides

 

[Syleng1]

Keep me posted- really appreciate it.

 

[69FBCuda]

PM sent