[SOLD] Edelbrock D64 or Offenhauser

[65dartcharger]

Edelbrock D64 or Offenhauser 360 intake for 2 4bbl carbs. Will go on a 1965 273 cu. Must be in good condition.

Thanks FABO!

:glasses7:

 

[str12-340]

I have a D-64 that I would part with. send PM with proposed price Plus shipping. How the heck would I ship it to Sweden? This is to actually use on a car that you would drive right??

I'm in Washington state 98070

Once I get your PM, I'll send pictures

Mike Dawson

PS: Edelbrock sells a set of 500 cfm Performer carbs (AFB) for progressive linkage dual quads that I would recommend with this set up. The d-64 is a much better choice than the
Offenhauser (I've used both). The Offenhauser is a single plane manifold with VERY short runners that are problematic if you intend to use the car on the street.

 

[RustyRatRod]

The D64 will have more bottom end torque VS the Offenhauser's higher torque band. If that helps any.

 

[66340SEDAN]

Ship it to me, I ship stuff to Ulf all the time....no big deal....intake is "small beans" compared to some stuff he has recieved from me :glasses7:

I have a D-64 that I would part with. send PM with proposed price Plus shipping. How the heck would I ship it to Sweden? This is to actually use on a car that you would drive right??

I'm in Washington state 98070

Once I get your PM, I'll send pictures

Mike Dawson

PS: Edelbrock sells a set of 500 cfm Performer carbs (AFB) for progressive linkage dual quads that I would recommend with this set up. The d-64 is a much better choice than the
Offenhauser (I've used both). The Offenhauser is a single plane manifold with VERY short runners that are problematic if you intend to use the car on the street.

 

[65dartcharger]

Thanks for the response. I have sent a PM str12-340. And thanks Keith for helping me out with shipping. :burnout: