engine not level?

-

Eric Mulay

Well-Known Member
Joined
Dec 23, 2019
Messages
46
Reaction score
3
Location
san luis obispo california
I have a 74 duster, came with a slant 6, im installing a magnum 360.
i have the Schumacher swap mounts
I have the engine in, its not level at all.. any idea why? ]
anyone else have this issue?

360 mag.jpg
 
Mounts on the correct sides? Are you 100% sure? Not 99 but 100%.
 
Did you modify the K-member as required by the Schumacher mounts on a 74 slant 6 k-member? If so, did you measure correctly?
You must shorten the driver side slant 6 mounting position on the k-frame to use those conversion mounts. Just making sure.
 
Did you modify the K-member as required by the Schumacher mounts on a 74 slant 6 k-member? If so, did you measure correctly?
You must shorten the driver side slant 6 mounting position on the k-frame to use those conversion mounts. Just making sure.


yeah,, so,, i just talked to them,
i did not get those instructions,
makes sense on why it wasnt level. fixed now.
thanks
 
I have a 74 duster, went from slant 6 to 318, drivers side metal on k member has to be cut off and a 9/16 hole drilled
 
-
Back
Top