engine to trans braces .

[stroker402]

mopar engine to trans brace
I have question regarding this engine to trans brace .. is it a BB or sm block mopar......... auto or 4speed ?
I have two that are Identicle but one is shorter by 1 inch.
this item in pic measures 12" end to end
Thanks !

 

[pettybludart]

Smallblock/Auto.

 

[burdar]

BB's didn't use them. There are different lengths depending on what engine they came from. The 360 has the mounting point on the block in a different place then a 318. I don't remember which one takes the longer one.

One of the braces won't fit with headers. One will. At least that's the way it was with an old cheap set of Flowtech headers I had on a 360. I wonder if they will both fit with TTI's?

 

[TrailBeast]

Passenger side won't go on with headers.

And yes, small block auto.

 

[stroker402]

ok ..
What engine /trans will the shorter brace fit ?..4 speeed? it measures 11"
here is a pic of the 12" and the 11" brace side by side .

 

[Moparparts]

340's technically take different ones and they have a different part number than a 318 does because they are designed a bit different

 

[stroker402]

340's technically take different ones and they have a different part number than a 318 does because they are designed a bit different

So what do you think ..........do these braces appear to be for 340 or 318 ?
Thanks .
john