[WANTED] Good Running 440

[dart6]

Situated in Ca90220

 

[cudamark]

Pirrit Automotive in Auckland can probably build you one.

 

[dart6]

Pirrit Automotive in Auckland can probably build you one.

Got to have one first

 

[cudamark]

They may have one to build. I've sold them many over the years.

 

[oldkimmer]

I have a block bored .030 and a 505 stroker kit. Also most everything else to build it. Kim

 

[dart6]

Thanks but i should have added it''s for a friends boat and just requires a good runner, no rebuilds

 

[GTX JOHN]

Thanks but i should have added it''s for a friends boat and just requires a good runner, no rebuilds

I have a Steel crank Early 440 Short Block .030
Fresh build with 3000 Miles
9 to 10 : 1 Depending on heads
Alignbored/Zero Decked/Balanced Steel Crank
$1950.00

I will Included 440 Heads (906) Fully Ported with HP Springs/Rockers/Pushrods
for Additional $850.00

This engine was in my Mopar Muscle Cover Car 1969 Valiant
It ran 10.90 @ 119 MPH through the muffler on Pump Gas
I won LVMS track Championship with it in Pro Class!
Shifting @5500 = perfect for a 100 MPH Flatbottom

I built a 500 Stroker to go in the 9's this year and do not need this
engine anymore sitting around shop - I used the Milodon Oiling System
and Isky Camshaft in the new engine.

I will deliver to Calif. for Gas money

 

[cudamark]

Thanks but i should have added it''s for a friends boat and just requires a good runner, no rebuilds

You might still talk with them, I've sold him some running 440's too. As you're probably finding out, trying to buy a good runner, then shipping it to Compton, and then paying the freight down to NZ is not going to be cheap.

 

[dart6]

You might still talk with them, I've sold him some running 440's too. As you're probably finding out, trying to buy a good runner, then shipping it to Compton, and then paying the freight down to NZ is not going to be cheap.

I'll give Mark a call

 

[famous bob]

I have a Steel crank Early 440 Short Block .030
Fresh build with 3000 Miles
9 to 10 : 1 Depending on heads
Alignbored/Zero Decked/Balanced Steel Crank
$1950.00

I will Included 440 Heads (906) Fully Ported with HP Springs/Rockers/Pushrods
for Additional $850.00

This engine was in my Mopar Muscle Cover Car 1969 Valiant
It ran 10.90 @ 119 MPH through the muffler on Pump Gas
I won LVMS track Championship with it in Pro Class!
Shifting @5500 = perfect for a 100 MPH Flatbottom

I built a 500 Stroker to go in the 9's this year and do not need this
engine anymore sitting around shop - I used the Milodon Oiling System
and Isky Camshaft in the new engine.

I will deliver to Calif. for Gas money

How many miles/runs on it ??

 

[GTX JOHN]

Like the ad states 3000 street miles.
Probably a dozen trips to the track
on it = maybe 60 - 75 passes.
Just as fast last time out to the track
as it was first time out!
But I am in Boulder City Nevada (Near Vegas)

I will deliver for Gas Money and Beer!

 

[famous bob]

Like the ad states 3000 street miles.
Probably a dozen trips to the track
on it = maybe 60 - 75 passes.
Just as fast last time out to the track
as it was first time out!
But I am in Boulder City Nevada (Near Vegas)

I will deliver for Gas Money and Beer!

DUH , ME !

 

[GTX JOHN]

A Darn Good Engine for less than I often see worn out
early Steel crank cores For Sale!