1973Barracuda
Well-Known Member
- Joined
- Dec 11, 2009
- Messages
- 2,032
- Reaction score
- 2,452
This review is for guys(like I was) that can't decide which sway bar manufacturer to use. First off, this was done on an e body, but still will show the quality and results etc. I installed a 1 1/8 front bar on a 73 cuda and the results were fabulous. Install was straight forward and the instructions were good. The bar is good quality as well as all the components with it, except.....I was shorted one bushing for the endlink. Kind of annoying when you spend good money on a kit and have to spend another $20 on bushings(can't buy just one), and of course the time to get them. Overall I am pleased with the product and recommend it, plus I got a great deal on it.
I am an e body guy guy, but use this site for almost all my research and advice due to the volume and experience of the users. This site rocks.
Jason
I am an e body guy guy, but use this site for almost all my research and advice due to the volume and experience of the users. This site rocks.
Jason















