HELP, 64 Valiant motor mounts

[Jr340Duster]

I have a 64 Valiant. Its a slant 6, and I want to put in 340 in it. A friend got some early A body metal motor mounts off this site. I bought the rubber part of the motor mounts from Summit racing, and they won't fit the metal brackets my friend got from someone on this site. WHERE CAN I GET THE CORRECT mounts????
H E L P

 

[Keith Mopar]

Try here:

http://www.engine-swaps.com/

this is what I used.

 

[pettybludart]

I used the Schumacher mounts on my 360,but removed the rubber biscuits for homemade solid mounts.

 

[Darter6]

Look up PolyBushings.com I used their mounts in my 64 Dart(Slant six) BUT contact them for V8 mounts for your year.

 

[pishta]

Question: do you have 273 mounts? They wont fit a 340 unless you shim the offending side with a few washers. The rubber/metal insulator should fit if its the offset biscuit type. Bear in mind the oem 64 273 insulator was thick, like 3 inches. Not the thin 1 inch later style. It raises the motor for centerlink clearance.

 

[abodyjoe]

http://engine-swaps.com/Pages/ProductsYear/63.66aBody.html

 

[Rapid Robert]

WHERE CAN I GET THE CORRECT mounts????

You're in luck as you already have em. Your /6 rubber ones

 

[chryslerfat]

You're in luck as you already have em. Your /6 rubber ones

The /6 rubbers are different. You will need to order mounts for 66 and earlier Valiant to get the correct ones at a local parts dealer. That is what I had to do to get the correct ones for mine. Here is a set.

http://www.ebay.com/itm/1964-1965-1...ash=item3d04bf34ff:g:tUgAAOSw6BtVT17L&vxp=mtr

 

[BillGrissom]

You can probably use either type of biscuit mount. I had the later thin ones on my 1965 273 (for more hood clearance) until I had to switch to the later Federal p.s. pump which hit the K-frame, so went back to the original thick ones. With the thin ones, I had to **** them so one bump fit in a bracket hole and drilled another hole for the other bump. Might also consider what that does to your driveshaft angle.

 

[Rapid Robert]

The /6 rubbers are different.

I could of swore I used my /6 rubber mts way back when I did this (but it was 10+ yrs ago) EDIT Those are the ones I have (in the eBay link).

 

[pishta]

That ebay link shows you all you need to know.