help needed =headlight removal -67 barracuda grille

[Dave NEO]

Guess I'm being cautious not to screw up anything and as dumb as this might sound - how do I get at the headlight to replace it? appears only top screw of actual bezel is accessible - looks like a number of pieces of trim/grille might have to come off but not sure. appreciate any comments - thanks
Dave

 

[68original]

On a 67 there will be three screws holding the headlight surround part of the grill in place. One on the fender and two by the grill section. Once you remove the surround you can get at the screws for the headlight bezel that actually hold the lamp in place.

 

[4spdragtop]

Yep the outer bezel has to come off, then headlight trim ring.

 

[68original]

Thanks Steve. Couldn't quite get my terminology right. Too much Bookers bourbon tonight.

 

[AJ/FormS]

Is today Friday?........lol

 

[68original]

Yup. It's Friday somewhere in the world. That's all I need to know.

 

[Dave NEO]

hey! great, that helps - thanks. I'm 68 and should remember more about these cars...but...whateva.. Must say, enjoying hood moving side to side and front to back when we revs it a bit...
thanks again. (btw, '68 conv - yes a '67 grille, - 383 4spd., Edelbrock Performer 383 intake, Summit M08600VS 4 bbl, Suregrip..).

 

[4spdragtop]

It is now...and the 13th!

Is today Friday?........lol

If I remember correctly the 2nd gen cuda is a breeze compared to my 67 coronet headlights what a pita!
Ragtop eh and bb and 4spd, perfect combo for the fish. Mine has sb
Happy Friday the 13th

hey! great, that helps - thanks. I'm 68 and should remember more about these cars...but...whateva.. Must say, enjoying hood moving side to side and front to back when we revs it a bit...
thanks again. (btw, '68 conv - yes a '67 grille, - 383 4spd., Edelbrock Performer 383 intake, Summit M08600VS 4 bbl, Suregrip..).

 

[Mwjones]

Can anyone give me a source for the front grill parts for a 67? The only place I have found is a little hard on the budget. Thanks.

 

[68original]

If you want driver quality, place a wanted thread in FABO. This forum is best source, IMO. If looking for finished pieces, Partsmonsta is who I would start with. No such thing as finished cheap grill parts for 67-69 Barracudas.