Help-Tech ? Removing Bell Housing from Hemi

[Tribute SS/A 68]

I have installed a Lakewood bellhousing behind my hemi in my 68 Barracuda. The engine & bellhousing were installed together from the top.
After numerous calls to Mcleod, the new clutch has issues, it has to come out. So my question is: Can the bellhousing be removed without pulling the engine ? It looks so close to the firewall, I think not. It appears if I let the engine down in the back after removing the trans, it will just hit the firewall, as well as not being able to remove the bolts, - that's how it looks anyway, Anyone here deal with this before ?
Thanks in advance.

 

[Mrmopartech]

What you will need to do is this.Lift the motor and remove the mounts and lower the motor back down on a piece of wood in the front,allow the motor to tilt and then remove the housing,mrmopartech

 

[Tribute SS/A 68]

The header is so close to the steering box, and the oil pump is also close to the K frame, I will be surprised if that will work, maybe drop the whole engine K frame and all a few inches ?

 

[HemiMark]

maybe drop the whole engine K frame and all a few inches ?

That is how I would do it........... quick and easy..............

 

[Tribute SS/A 68]

Any more knowledgeable elders out there ! help ?