Help with garnish panel install on 69 Cuda FB.

[RealWing]

I'm installing the rear window garnish panel and am unsure if it clips over this tab or not. I did get it over that tab on the pass side, but was very difficult. Looking for help from someone who has installed this panel on a FB.
Thx
Jim

 

[Super-Cuda]

I'm going to take a stab at this.

I think the lip on the garnish panel is squat together too much as looking at the pic, the catwhisker will not clip on properly unless the molding is over the tab. That molding goes tight to the door post and also, flush with the headliner trim so movement of it is limited for adjustment.

 

[dadsbee]

Doing my best to look in there on the Wife's '67 with Whiskers in the way.... I can fully see that "triangle" with the hole in it. Doesn't appear to be clipped over it at all. Would love to pull the whisker... but not gonna happen.

 

[RealWing]

Thanks the panel goes on a lot easier when it isn’t forced to go over that tab.

 

[Daves69]

Maybe this helps.
Passenger side. Cam is inside looking outward................