How do I install this throttle cable?

[Andre68]

I'm putting my engine bay back together and I was dumb and didn't take pics of the engine bay before dismantling. So now that it's time to insta the throttle bracket I have no idea how it goes (first mopar).

If anyone has pics of there stock throttle set up that would be awesome! Or walk me through the set up, maybe both!

For what it's worth I have an edelbrock carb and intake manifold on a 318

 

[70aarcuda]

try the back two intake manifold bolts....on the driver side...lol

 

[BillGrissom]

Ditto above. Many photos here if you search, with exactly that question. Varies slightly between 2 bbl and 4 bbl, but your parts all fit once. Also yours must be a later car (didn't bother to tell us), since early A's were different.

 

[Andre68]

It's a 68 dart with a 318. Yea I've been trying to find some stuff but I keep seeing stuff with a kickdown, now I'm not sure if it matters but aren't kickdowns for automatics? I have an a833

 

[Andre68]

Well I installed it to the back on the intake manifold, but now the throttle cable is at an angle to go into the hole on the firewall to get to the pedal.

Ive tried to find pictures but i cant.

1) do i need the kickdown cable?
2) any pics or tutorials on the set up?

 

[70aarcuda]

Well I installed it to the back on the intake manifold, but now the throttle cable is at an angle to go into the hole on the firewall to get to the pedal.

Ive tried to find pictures but i cant.

1) do i need the kickdown cable?
2) any pics or tutorials on the set up?

don t need kickdown with manual trans...

 

[70aarcuda]

here...

 

[OldmanRick]

Here's another.....Disregard the "kickdown" as it wont apply to the 833. You'll never get a straight shot with the cable to the firewall. Just curve it over and feed it thru....

 

[70aarcuda]

you also need the edelbrock mopar adapter ....that goes on the carb.


http://www.summitracing.com/parts/edl-1481/overview/

and lastly....if you are using the 2 barrel throttle cable ...you might want to check it over all length as somtimes.....they are too short for the 4 barrel change over

 

[4spdragtop]

Here's some refernece pics

 

[Andre68]

awesome!thanks