How Tight?

[Fishthatkills]

Hey I mounted some Crager SS's on my 67' Barracuda. My question is wht is the torque spec for these wheels. They are on 7/16th stud 5 on 4" bolt circle with drum brakes. I am using Crager lugs with washers, shank style.

John D. Beckerley

 

[doug 371]

factory torque spec is 55 lbs for 7/16

 

[memike]

factory torque spec is 55 lbs for 7/16

Thank you Doug 8) I was going to say a small four way lug wrench and just get it tight and check them after 5 miles of driving 8) That's the old school way if you don't have a torque wrench :-D
Good fast info is best here a this site when we have folk's like you here with many others Doug :cheers: Thank you for taking care of our folks here :cheers:

 

[Fishthatkills]

Is'nt that for the acorn nut? So it does not matter what type of nut you are using? Thanks for the reply!

John D. Beckerley

 

[cudaspaz]

Thank you Doug 8) I was going to say a small four way lug wrench and just get it tight and check them after 5 miles of driving 8) That's the old school way if you don't have a torque wrench :-D
Good fast info is best here a this site when we have folk's like you here with many others Doug :cheers: Thank you for taking care of our folks here :cheers:

That would suck checking your lug bolts after every 5 miles of driving though. LOL.

Just kidding.

 

[memike]

That would suck checking your lug bolts after every 5 miles of driving though. LOL.

Just kidding.

:toothy7::notworth: You gave me a good laugh :-D
A trip to the store be back in a hour :wave: LMAO :cheers:




One time only, the first 5 miles :-D Thank you for the big grin :-D