hp estimate for a mild 360?

-
K

kevins67

Active Member
Joined
Jan 19, 2014
Messages
36
Reaction score
1
Location
Sparta mi
Hey everyone just wondering if anyone has a dyno simulator they can input my specs. Here it is 74 360 stock bottom end bored 0.30 over kb 107s stock J heads with 2.02- 1.60 ports stock rockers lunati 279-279 duration and 480-480 lift @ 109lsa
Rpm airgap and a eddy 600 cfm carb with 9:5:1comp.thanks
 
download dyno2000 i foun it free, you can plug in what you have. get accurateish numbers and then you can tweak before you buy parts
 
Probably mid 300s, with good tuning you could get higher. I've built a similar engine but with eddy heads and about 11:1 compression ratio.
 
My 360 is similar. According to my drag strip times, it was making 330hp at the wheels.
 
You must log in or register to reply here.
-

Back
Top