"Humpty Dumpty" Interior Pieces ('65 Barracuda)

[dibbons]

Four of six interior plastic trim pieces are broken. I have had some success in the past patching similar pieces with a two-part epoxy (some of these might not be available to purchase). "A" pillar molding not too wasted:

 

[dibbons]

I believe these attach to the side windows or sail panel somewhere.

 

[dibbons]

These are corner pieces in the trunk area.

 

[dibbons]

Here he is now:

 

[Keith Mopar]

Yes I'm in the same boat as you. Just putting my 65 Barracuda together and most of it I have used 2 part epoxy as it seems to work the best. The problem is the rest of the pieces are so brittle you have to be very carful with them breaking in a new spot. I have filled one piece with glue so now I have to paint them so they all match.

 

[dibbons]

When in danger of breaking again or in another location, I coat the backside of the plastic trim pieces with the two part epoxy to reinforce them against further damage in the future or during installation.