im new too!

-
skycuda67

skycuda67

Well-Known Member
Joined
Mar 11, 2009
Messages
58
Reaction score
0
Location
Columbida gorge, Oregon
saw this section so thought id say my first hi to everyone too! I joined to get the best advice out there for my a-body project! Im 20yrs old, bought my first car, a 1967 barracuda when i was 18 and now im getting around to fixing her up. Very solid, only rust on the body panels is back left quarter wich ive found a couple little holes in, and floorboards on the right side have a couple spots im taking care of, other than that its very clean and solid. It has a 727 with manual valve body shift kit and right now im building a 360 interceptor for it which im sure i'll be asking a lot of advice on! If anyone has lots of knowledge on the 360 and has some tips for building it id love to hear em! Im a welder and have done quite well at it and custom fabrication and im kicking around fabricating my own twin turbo system for the 360 so if anyone has knowledge on what internals would be best to use for that and so on id be forever grateful! Sounds like hardest part will be tuning the carb for it?? I'll hopefully have pics up soon and glad to be here!
 
Welcome to FABO sky! Sounds as though you have a good foundation for a project. You may want to talk a look at/PM GoFish and his SB turbo project.

Also, no need to fabricate a twin turbo setup for your SB. Contact Gilligan ([email protected]) and purchase his setup for $1K + SH (see attached pic). It's just that easy. ;)

2dmagl-1.jpg
 
Welcome! It sounds like you have a great project going! Best of luck and keep us posted on the progress, enjoy the site!!
 
You must log in or register to reply here.
-

Back
Top