Dave Goetz
Active Member
Im In The Process Of Building A 340 Strocker For My 1968 Baracuda With Ecno W2s Would Like To Know What In Take Would Be Best For Quarter Mile Drags.who Makes And?
Intake Manifold For W2
- Thread starter Dave Goetz
- Start date
-
AdamR
Big Member
Edelbrock Victor W2 or the Indy single plane. Not to many choices for W2s really.
ramcharger
Dismember
Mopar performance makes a single quad single plane and a dual quad tunnel ram too.
The MoPar M-1 single is the best all around intake.
The Victor is a higher RPM HP making intake. Real nice part.
The Indy comes in rectangle and oval and will make the highest HP with a extremely high capabilty of rpm and volume. It is a big intake, a serious race part. Excellent design.
The Victor is a higher RPM HP making intake. Real nice part.
The Indy comes in rectangle and oval and will make the highest HP with a extremely high capabilty of rpm and volume. It is a big intake, a serious race part. Excellent design.
tensec340
The LEGEND
I had 377 stroked 340, with Econ W2's (flowing 328 )
1080 dominator and M-1 Intake, this ran very well, 9.95's for 12 years !3300lb dart with street tires and mufflers!S.S sprimgs only
ask rumble about it !:thebirdm:
1080 dominator and M-1 Intake, this ran very well, 9.95's for 12 years !3300lb dart with street tires and mufflers!S.S sprimgs only
ask rumble about it !:thebirdm:
GTXperience
Orig Stealth Mod
Dave, do you have your Econos yet?
-
