Intake Manifold

-
M

mopars

Well-Known Member
Joined
Jun 6, 2007
Messages
68
Reaction score
0
Location
Toronto, On
Hey
I got a 368 with 1.88 valves and its going to be running a 650 carb and The cam is one down from stock? I'd like to run a Duel plane intake manifold but i'm just curious if one is better then another one or what you have liked and disliked.
thanks!
 
1 down from stock!?!?!? A 318 cam?????

Factory iron will take care of the chore. No problem.
 
hey sorry about that should have added more detail. its the P4452757, Adv 248/256, @ .5 211/218, O lap 32, ceterline 110, Lift .410/.425.
The link
http://www.mopar.com/Tables/37.pdf

I"m looking what one would be better the weiand stealth or edelbrok Performer? Is there a different between weiand stealth and the chysler holley duel plane from preformance because they look idetical.
thanks
 
The Mopar dual plane and Edelbrock Performer have slightly less volume than the Weiand Stealth. The Performer RPM & Air Gap are good manifolds and very likely the same internally. But I consider the Weiand Stealth one of the better manifolds also, similar to the LD340. I've used the Stealth on my race car, but I never made any conclusive comparisons between it and an Air-Gap I tried once.
 
mopars said:
hey sorry about that should have added more detail. its the P4452757, Adv 248/256, @ .5 211/218, O lap 32, ceterline 110, Lift .410/.425.
The link
http://www.mopar.com/Tables/37.pdf

I"m looking what one would be better the weiand stealth or edelbrok Performer? Is there a different between weiand stealth and the chysler holley duel plane from preformance because they look idetical.
thanks
Click to expand...

I had that cam in basically a stock 360 I had at one time. I had that cam with airgap intake and 600cfm edel. Was a nice little combo for what it was. I had the engine in my Dart for awhile while I was building the motor I have now. I really wanted to find a truck to put it but I have limitied space in my 1 car garage. So I ended up selling it. Than 6 months later I bought a rolling duster chassis it would have been nice in. Than about a year later I had to sell the duster cause I got tired of the cops harrassing me about it. Oh the irony!
 
I forgot. Port match the intake to the heads, thay will need it. This should be good for a nice street car. Happy motoring.
 
You must log in or register to reply here.
-

Back
Top