Is this the correct book for small blocks?

-
W

Woodsman341

Well-Known Member
Joined
Oct 28, 2022
Messages
402
Reaction score
134
Location
Columbia, SC
I saw in a post some time ago that there is one book considered to be better among builders, especially for people like me who are experienced with repair, remove and replace, and general overhaul, but who haven't done an actual rebuild from crank to valves. Is this the book?
I can't find what I'm looking for through the search function.

Also, given my lack of high end tools, I'll have a machine shop deck and bore, scope the block, etc, but feel confident in my ability to assemble properly machined parts. :)

71YMvK5n5mL._AC_SL1500_.jpg
 
The BEST book on rebuilding is the Factory Service Manual.
The others all have some value as far as tricks or interchangeability between years, but the first book you should always buy (or download, if that is your preference) is the FSM.
 
Professor Fate said:
The BEST book on rebuilding is the Factory Service Manual.
The others all have some value as far as tricks or interchangeability between years, but the first book you should always buy (or download, if that is your preference) is the FSM.
Click to expand...

I do have the year-specific FSM, but wondering if something like this would be useful, and you've pretty much answered. :)

Much appreciated!
 
Although I do not have personal experience of that particular book; in the past I have found books printed by S-A designs to provide adequate information. In my experience, I read everything I could get my hands on. The Mopar Performance engine book is an excellent source, as is "How to Hot Rod Small Block Mopars" by Larry Shepard. You can't know too much, reguardless of what it is you are building/rebuilding. Put pen to paper, write out what you want, it helps to clarify your ideas, then you can study your reference book(s) to acheave your goal.

Good luck
 
JBurch said:
Although I do not have personal experience of that particular book; in the past I have found books printed by S-A designs to provide adequate information. In my experience, I read everything I could get my hands on. The Mopar Performance engine book is an excellent source, as is "How to Hot Rod Small Block Mopars" by Larry Shepard. You can't know too much, reguardless of what it is you are building/rebuilding. Put pen to paper, write out what you want, it helps to clarify your ideas, then you can study your reference book(s) to acheave your goal.

Good luck
Click to expand...

My REAL goal is to build my 360 to have at least 300 HP, but remain very easy to use as a regular street driver, without going all power crazy, if that makes sense. It should be doable, right? I see guys posting about making them into 408 strokers hitting over 400 horses, so with a mild cam and a few other goodies (which I'm not sure of yet), it shouldn't be hard to go from the stock 270s to 300, I think. Why 300? Mainly just so I can say it has 300 or 310 or whatever. Why not 400? I don't want to drive around with a big ol' cam and a loping idle. Same reason I want to swap my 3.91 Sure Grip for something like 3.23 Sure Grip. I know z I'm rambling, but it's super bowl Sunday and I don't watch that, so there. :)
 
Good reference book. Some of the stuff in those books about blocks, wall thickness etc in them is folly.

It will definitely have good info about processes and approaches. Some of the info may be outdated by better things done today.

Building a 300hp 360 is easy and can run like your grandmas ol 318 at idle. An all stock 360, even the low compression models, 4 barrel intake with a XE262-268 or lunati voodoo 401-402 cam will get there no issue. .460-.480 lift cam should do the trick.
 
Woodsman341 said:
I saw in a post some time ago that there is one book considered to be better among builders, especially for people like me who are experienced with repair, remove and replace, and general overhaul, but who haven't done an actual rebuild from crank to valves. Is this the book?
I can't find what I'm looking for through the search function.

Also, given my lack of high end tools, I'll have a machine shop deck and bore, scope the block, etc, but feel confident in my ability to assemble properly machined parts. :)

View attachment 1716048773
Click to expand...
If you are looking for assembly procedures with photos that is a good one.

If you are looking for a book for helping you select parts to build power then there are no good ones. All of the performance books are pretty much outdated by the time they are printed as parts are discontinued. In this case, use a good machine shop, tell them what your goals are, let them spec the build, and then you can assemble it.
 
You should be able to pick up some performance "tweaks" from this book also. It's an old school book that gets into some heavy duty race stuff, but there are several pointers on honing, valve jobs and such that are beneficial to stock-type rebuilds as well. I don't know if it's still available or if it may have a different cover on it now.

Mopar engine book.jpg
 
Locomotion said:
You should be able to pick up some performance "tweaks" from this book also. It's an old school book that gets into some heavy duty race stuff, but there are several pointers on honing, valve jobs and such that are beneficial to stock-type rebuilds as well. I don't know if it's still available or if it may have a different cover on it now.

View attachment 1716048963
Click to expand...
Excellent book. Had that exact early edition copy in 1983 after buying my first Mopar. The book disappeared long ago and when it was time to get back into Mopars that was the first book I re-bought. Still relevant. Good info in that one. iMO, one book is not enough though. It takes a combination, some are a little vague or not as in depth as needed. Great here, lacking there. The more the better I say
 
the FSM is a must have, IMO. the Mopar Performance "A engines" book is a great resource. if had to pick one to compliment those two, it would be the larry shepard "how to hot rod small block mopars". also, that book has a "recipe list" in the back for engine combinations for specific power levels.

having many points of reference is always a good thing, the more literature the better.

300+ HP on pump gas with mild manners should be a breeze. 9.5:1 compression, a cam under .500 with reasonable duration, airgap and something in the 750cfm range, headers or 340 manifolds.

unless you enjoy the work, or want to do it for the experience, having the machine shop assemble the bottom end won't set you back much more money and you can breeze thru the rest of assembly.
 
Locomotion said:
You should be able to pick up some performance "tweaks" from this book also. It's an old school book that gets into some heavy duty race stuff, but there are several pointers on honing, valve jobs and such that are beneficial to stock-type rebuilds as well. I don't know if it's still available or if it may have a different cover on it now.

View attachment 1716048963
Click to expand...
That may be the first book I ever got.
 
The "320" HP 360 crate motor was a bone stock production line 5.9 with a aluminum intake, possibly valve spring upgrade and I think it even had the stock cam.
 
Have you got a writer or publisher?
Thanks guys!
Locomotion said:
You should be able to pick up some performance "tweaks" from this book also. It's an old school book that gets into some heavy duty race stuff, but there are several pointers on honing, valve jobs and such that are beneficial to stock-type rebuilds as well. I don't know if it's still available or if it may have a different cover on it now.

View attachment 1716048963
Click to expand...

12many said:
Excellent book. Had that exact early edition copy in 1983 after buying my first Mopar. The book disappeared long ago and when it was time to get back into Mopars that was the first book I re-bought. Still relevant. Good info in that one. iMO, one book is not enough though. It takes a combination, some are a little vague or not as in depth as needed. Great here, lacking there. The more the better I say
Click to expand...
 
Woodsman341 said:
My REAL goal is to build my 360 to have at least 300 HP, but remain very easy to use as a regular street driver, without going all power crazy, if that makes sense. It should be doable, right? I see guys posting about making them into 408 strokers hitting over 400 horses, so with a mild cam and a few other goodies (which I'm not sure of yet), it shouldn't be hard to go from the stock 270s to 300, I think. Why 300? Mainly just so I can say it has 300 or 310 or whatever. Why not 400? I don't want to drive around with a big ol' cam and a loping idle. Same reason I want to swap my 3.91 Sure Grip for something like 3.23 Sure Grip. I know z I'm rambling, but it's super bowl Sunday and I don't watch that, so there. :)
Click to expand...
What year 360? What heads do you have?
 
As many have said already, the more information the better. There are many threads on this forum with revelant and current information on what does and doesn’t work to meet your goals.I was like you and was not looking to build a street monster with no street manners. I put my engine together during the winter of 2021, and due to budget and availability of parts it came together as a 9:1 408 stroker. Car has tons of torque and good driveability.Estimate it to be around 350hp. Ps. I don’t watch football either.lol RJ
 
4spdragtop said:
Have you got a writer or publisher?
Thanks guys!
Click to expand...
There is a book #/code, probably on the back, that can be used for a look-up at a big book store. On mine I believe it's:

ISBN 0-931472-03-02

S-A Design Publishing Company

By Larry Schreib & Larry Atherton

The one 12many posted may be the same book, just with a different cover.
 
Locomotion said:
You should be able to pick up some performance "tweaks" from this book also. It's an old school book that gets into some heavy duty race stuff, but there are several pointers on honing, valve jobs and such that are beneficial to stock-type rebuilds as well. I don't know if it's still available or if it may have a different cover on it now.

View attachment 1716048963
Click to expand...
That's a good one, the first book I bought in the 70's.
 
Locomotion said:
There is a book #/code, probably on the back, that can be used for a look-up at a big book store. On mine I believe it's:

ISBN 0-931472-03-02

S-A Design Publishing Company

By Larry Schreib & Larry Atherton

The one 12many posted may be the same book, just with a different cover.
Click to expand...
Same book, 1990 edition of the 1978 1st edition. Only the cover is different. Same ISBN #, also shows the Part No.: 03-2
 
Woodsman341 said:
I saw in a post some time ago that there is one book considered to be better among builders, especially for people like me who are experienced with repair, remove and replace, and general overhaul, but who haven't done an actual rebuild from crank to valves. Is this the book?
I can't find what I'm looking for through the search function.

Also, given my lack of high end tools, I'll have a machine shop deck and bore, scope the block, etc, but feel confident in my ability to assemble properly machined parts. :)

View attachment 1716048773
Click to expand...

For a beginner this book is very good. Used it to build my first engine at 19.

Amazon product ASIN B001CYIZUU
 
That books ^^^^^^ is what I built my first engine from. Good book. That’ll get you going for sure.
 
Thanks guys, I thought the cover posted by @12many looked familiar lol. I've dug into the other 2. But looks like i havent checked this one out yet.
Locomotion said:
There is a book #/code, probably on the back, that can be used for a look-up at a big book store. On mine I believe it's:

ISBN 0-931472-03-02

S-A Design Publishing Company

By Larry Schreib & Larry Atherton

The one 12many posted may be the same book, just with a different cover.
Click to expand...

fishmens67 said:
That's a good one, the first book I bought in the 70's.
Click to expand...

12many said:
Same book, 1990 edition of the 1978 1st edition. Only the cover is different. Same ISBN #, also shows the Part No.: 03-2
Click to expand...

20230212_205100.jpg


20230212_205515.jpg
 
Last edited:
Woodsman341 said:
I saw in a post some time ago that there is one book considered to be better among builders, especially for people like me who are experienced with repair, remove and replace, and general overhaul, but who haven't done an actual rebuild from crank to valves. Is this the book?
I can't find what I'm looking for through the search function.

Also, given my lack of high end tools, I'll have a machine shop deck and bore, scope the block, etc, but feel confident in my ability to assemble properly machined parts. :)

View attachment 1716048773
Click to expand...
That should give you all the information that you'll need
 
I have one of Larry Sheppard's book and the one you posted originally... I use Sheppard's book constantly and highly recommend it. I think I have opened the other one a half dozen times in 10 years and honestly I dont recommend it. There is nothing in that first book you couldn't get from the FSM.
 
You must log in or register to reply here.
-

Back
Top