[SOLD] Kelsey Hayes brake setup
- Thread starter berry-cuda
- Start date
-
- Status
What do your calipers look like?
All there, all complete.
Good hard lines, All 4 of the pad hold down clips, Both Lt. & Rt. hose brackets.
Pictures, would be helpfull to see.
I guess the rotors were toast.
All there, all complete.
Good hard lines, All 4 of the pad hold down clips, Both Lt. & Rt. hose brackets.
Pictures, would be helpfull to see.
I guess the rotors were toast.
berry-cuda
Well-Known Member
Yeah I didn’t relize I didn’t have caiper pics I’ll get some up soon here, but yes all hard lines hose brackets and pad clips ,even piston boots look good on them although you say 4 pad clips there are only one big one per caliper that holds down both pads from what I remember, I do have rotors but I wouldn’t reuse them especially with the cost of shipping, only issue is one caliper bolt head is rounded off.
Ok.
I you have a pad hold down "plate" you might probably, officially, have 65-66 calipers, when that type was used in those years.
Makes a difference when buying caliper rebuild Kits, in getting the proper dust boots on the calipers.
I you have a pad hold down "plate" you might probably, officially, have 65-66 calipers, when that type was used in those years.
Makes a difference when buying caliper rebuild Kits, in getting the proper dust boots on the calipers.
berry-cuda
Well-Known Member
PM sent
- Status
-
