Kind of a what will it run

[gunship]

This is kind of a what will it run, but more like the difference.
I am going to be adding a trans go shift kit, 2500 rpm stall converter, 3.55 gears with a clutch style sure-grip. I ran it without any of this and 2.71 gears and ran 9.54 in the 1/8th mile. I am just curious what the time difference will be, any ideas? here is how it was set up when I ran last.


318 magnum
Sealed Power Cam .444/.458 lift
Summit racing air gap knock off
flow tech headers
edelbrock 600 CFM vacuum Secondaries

 

[JoeDust451]

This is kind of a what will it run, but more like the difference.
I am going to be adding a trans go shift kit, 2500 rpm stall converter, 3.55 gears with a clutch style sure-grip. I ran it without any of this and 2.71 gears and ran 9.54 in the 1/8th mile. I am just curious what the time difference will be, any ideas? here is how it was set up when I ran last.


318 magnum
Sealed Power Cam .444/.458 lift
Summit racing air gap knock off
flow tech headers
edelbrock 600 CFM vacuum Secondaries

I'll guess 9 teens 1/8.

 

[sledger46]

It is very dependant on the converter. If it is a no name 11" converter I would say 9.25. If it is a custom 9.5" converter then I would say 9.0x assuming you can hook it up.