Lokar kickdown cable capability?

[72moparswinger]

Hey guys so my car is done but i have my stock 904 2bbl kick down set up that won't work with my holley 4150/ eddy rpm manifold set up. I can switch it back to a eddy carb but I love my 4150 so would this cable work with my factory throttle bracket that bolts to my intake by not interfereing with it

http://www.summitracing.com/parts/lok-kd-2904ht/overview/

 

[69_340_GTS]

I am pretty sure that you will need some additional bracket(s) from Lokar. It seems like their kickdown cable only works with their throttle cable and it's associated brackets. Best to check directly with them.

 

[Dubob]

I am using this on my Big Block set up. Very good quality and a pretty straight forward install. Excellent group of people to deal with.

http://www.bouchillonperformance.com/trans_kickdown_cables

 

[72moparswinger]

Thanks all! I'm beginning to think if I found a factory kick down linkage off of a 904 4bbl carb car if it would even work with my holley and rpm air gap intake being the height the carb sits at

 

[rumblefish360]

I like my Lokar set ups. Real nice

 

[diymirage]

should work but you will need their (or a home made) bracket to mount it to