Lone Wolf Motorsorts Charity race team help

-
B

BillyBBad

Well-Known Member
Joined
May 22, 2004
Messages
194
Reaction score
0
Location
Beaufort, Missouri
Hello Boys and Girls,

Wanted to post to let you all know what I was up to and why I havent been around in a while.
I have been very busy building a race team for Charity and have come a long way in a short time. We are building 2 cars (for now) to raise awareness for kids with terminal illnesses.
We have so far the following..........

1. QA : Quilting angels

2. CMN : Children Mirical Network

3. RFC : Racers For Christ

This is who we have on board as of now, We are looking for others as well. We are also looking for people willing to donate parts for the Cuda or Challenger. Our plan is to run the Cuda this year and the Challenger next year and a few years to come.
100% of the winnings will go to the charity of our choice for that year.

We will hold a raffle or 2 for help on the car, We have done the numbers and we will need some kind of help.
HawaiiDuster has already helped with a donation and we thank him with all our hearts. Thank You Hawaii D :thumrigh:

We will raffle off a quilt (for the Ladies and for the married guys) and maybe a shotgun for the hunters out there.

Please if you have spare parts or are willing to donate for a good cause let me know.
We may not win a million dollars for our cause but we can raise awareness for them.

Thank You Very Much,
Billy B. Bad

"Lone Wolf Motorsports"
 
Hey Billy, post a proposed build up on the two cars with what you need and we can try to fill in the blanks. I still haven't found a job so money is a little tight, but I have some parts I could send. Start a wish list and we'll see what we can do :thumrigh:
 
WISH LIST FOR CUDA W/360

B&M or Hurst shifter for a 727
3200+ RPM Stall Converter
Single plane intake
4.11 - 4.56 gears
Aluminum or Chrome small bolt pattern wheels
68 S/S Hood Scoop
Double or Triple valve springs for "J" heads






WISH LIST FOR CHALLENGER W/440 BLOCK

Fiberglass doors/Hood/Bumpers/Decklid/Seat
MSD 6-AL
Gauges and Tach
Electronic Distribitor
Aluminum Single plane intake
Headers
Dbl or Trpl Valve springs
Cam (unknown size at this time)
Carb (unknown size at this time)
Shifter for a 727
4.30 - 4.56 gears
Aluminum or Chrome wheels (big bolt pattern)
N.O.S. System
Window net
Racing Harness (5 point)




If I can get any of these parts to help it would lower the cost for the team and put us that much futher ahead, Plus im sure I didnt mention half of what we need but help is help.
I do not have a paypal account at this time but may set one up yet tonight, If I do I will post when I have one.
I also need a decal with the web boards logo and site name, And the real Names of all who help. Because if im at just a car show I will make up a board to name all who have helped with this project.
I have been dreaming of doing this for 5 years now and we are getting closer to the goal.
The Cuda is closer to being done and will run us the 1st year, The Challenger will be the work horse the following year.
We have someone who has donated a compleate Roll Bar system and wheel tubs for it.
A web site should be done some time in Febuary as well as some T-Shirts and decals.
As for other Charities we are in talks with........
D.A.R.E.
MDA
CARDINAL GLENNON HOSPITAL
RONALD MCDONALD HOUSE

Our hope is to raise as much money and awareness as we can.

Again thanks to all that donate in anyway possable.

Billy B. Bad
"Lone Wolf Motorsports"
 
Billy I have a set of coated flowtech headers. They only have 1-3/4" tubes and will need some hammer work. I had them in my 70 440 Cuda ahd didnt feel like taking them out and beeting them so I switched to TTIs. They are in great shaper and your welcome to them. They may fit better if your gonna run a manual steering box. Let me know and I'll dig them out of my fathers garage.
 
HawaiiDuster said:
I got a new 6AL I can send you. How about a set of aluminum strut rods for the Challenger?
Click to expand...


Billy I have a set of coated flowtech headers. They only have 1-3/4" tubes and will need some hammer work. I had them in my 70 440 Cuda ahd didnt feel like taking them out and beeting them so I switched to TTIs. They are in great shaper and your welcome to them. They may fit better if your gonna run a manual steering box. Let me know and I'll dig them out of my fathers garage


Yes I can use all of that. :thumrigh:
Thank You guys, You dont know what this means.

Billy
 
Hey Billy i have a pair of small-lug Centerline wheels for the rear.
There 15inch and either 7/8 inches wide i cant remember exactly,if you want them let me know it will take a little while to dig them out there in my shed somewhere. :)
 
EvilScamp said:
Hey Billy i have a pair of small-lug Centerline wheels for the rear.
There 15inch and either 7/8 inches wide i cant remember exactly,if you want them let me know it will take a little while to dig them out there in my shed somewhere. :)
Click to expand...


Sure, this will save the cost of going to large bolt pattern axles.
Thanks for your help.

Billy
 
Thank You Cuda66 and EvilScamp for your donation.
Nice to have friends and people who understand dreams and are willing to help.
Again Thank You

Billy
 
No problem Billy,just glad to help out. :)
I'll send a pic. of them when i get them out,it may be a few days. :?
 
I know this may sound like a dumb question but which 6AL would you like? The regular red MSD box or the Black Mopar Performance box. Just thought I'd ask in case you had a special color scheme going on :D
 
It's my pleasure Billy, My wife won't let me spend any money on my car until we sell the house. So spending money on yours is the next best thing! :D
 
You must log in or register to reply here.
-

Back
Top