Machine shops and transmission shops help in Columbus Ohio?

-
J

jrmopar13

'72 Dart Swinger
Joined
Aug 30, 2010
Messages
7
Reaction score
1
Location
Galloway, OH
I am working on rebuilding my original 318 in my 72 Dart Swinger and I am trying to find a good reputable machine shop to have the block gone over and cleaned (42 years of grease...oil....and crap!). Is there anyone in the Columbus OH area that can share some ideas on where to go? I will also need a good Transmission shop to have the stock 904 cleaned up and gone thru. Any assistance would be greatly appreciated.
 
I live NE of Cincinnati. Here in the next few weeks I will be taking my engine to michigan to mike at MRL to do. I can't help you out with "local" shops. Transmission I have no idea. Cope racing transmissions is due west of you in Indiana. But again it's a drive.
 
Hucks machine shop on the east side of cincinnati. They don't do a ton of mopar work but they had a few in there when I dropped my block off. I blue printed the motor after they were done and everything was dead nuts on what the books say. Prices are fair too. Sorry I can't help you out in Columbus.
 
Hit the block with some over cleaner and go over it with some elbow grease. You could do a bang up job on the trans yourself, plenty of info on it.
 
Kammer & Kammer in Dayton/Huber Heights.

Old school guys.

Very, VERY Mopar.

Awesome.
 
You must log in or register to reply here.
-

Back
Top