[WANTED] ............MEGA block.........
- Thread starter oldkimmer
- Start date
-
- Status
I have a mega block on the shelf. It is .030 over clean bore with a standard deck. For sale depending on the offer. motor was taken from this 72 duster there was a write up on this motor .Was a fresh motor. 69383valiant bought the alum. heads.Was a Customers car. Make an offer.
This was a running 500 cu in motor that was featured in mopar muscle. Built by Hughes . The cam was to big for the springs coil bound and broke the keepers.
Heads were sold to 69383valiant on this sight. They were redone by my son after sale. I believe the complete bottom end is on the pallet but not sure.
All I can see from the floor is the block with the mildon race pan on it. This motor was a running motor with head issues caused by hughes. We built a pump gas motor at the machine shop for the car.
This motor was purchaced by my son from the owner to build a procharged race motor. The pistons that were in this motor were heavy and had L rings which are no longer available. I believe the crank is up there but not sure. Bores have hash marks no ridge. I threw the cam away but all small parts are there.
I am selling the block the rest is a bonus. This is not a give away it is not eating anything on the shelf. Just don't see a future here for it. Hospital monday torn aorta. Only mentioned sale do to post. Cash only will not ship
Heads were sold to 69383valiant on this sight. They were redone by my son after sale. I believe the complete bottom end is on the pallet but not sure.
All I can see from the floor is the block with the mildon race pan on it. This motor was a running motor with head issues caused by hughes. We built a pump gas motor at the machine shop for the car.
This motor was purchaced by my son from the owner to build a procharged race motor. The pistons that were in this motor were heavy and had L rings which are no longer available. I believe the crank is up there but not sure. Bores have hash marks no ridge. I threw the cam away but all small parts are there.
I am selling the block the rest is a bonus. This is not a give away it is not eating anything on the shelf. Just don't see a future here for it. Hospital monday torn aorta. Only mentioned sale do to post. Cash only will not ship
airwoofer
Drivetrain limit explorer
I have a set of flat top Ross pistons that measure 4.522 for a .030 overbore. They have valve reliefs for the biggest valves that can be put in a B1 head, gas ports, .041 / .041 / thin oil with lots of room to the top ring from the crown and a good distance between the oil ring and the pin. Skirts coated. Came out of my 499. Might be good for that block.
And good luck with the aorta operation OMM.
And good luck with the aorta operation OMM.
- Status
-
