Mickey Thompson breather grommets

[Phil21502]

i saw this posted before and searched and searched and can’t find it now. What factory Chrysler grommets fit these valve covers? They take the larger 1.75 or so ones. Not the normal 1.22. Thanks

 

[Abodybomber]

Outdated Holley part number :241-214.. .
I remember Motormite/ Dorman product ,does such.
Good luck .

 

[1994redram]

I think the mopar cast valve covers are the same size. I got my grommets from mancini.

 

[Phil21502]

Gonna go to advance auto after work tomorrow and not leave till I find something that works

 

[diymirage]

M/Ts are made by holley, and my holleys did not come predrilled, so i got the grommets first, and then drilled the holes to match

 

[Phil21502]

Well nothing to be had. Looking like I’m gonna have to weld them up and start fresh.

 

[midlife89]

I know they're out there,I bought a set for mine a couple years back.I'll try and think where I found them.For some reason I'm thinking slant 6 Gromets

 

[Abodybomber]

Give me measurements, I will secure you a proper part number.

 

[Phil21502]

1 5/8” to fit in the hole in the cover

 

[skrews]

Doorman # 42324
.750 id

 

[famous bob]

Doorman # 42324
.750 id

Its been a few yrs, but I bought about 4-5 diff sizes from auto zone one time , messing w/ my first chebby --------------

 

[skrews]

Its been a few yrs, but I bought about 4-5 diff sizes from auto zone one time , messing w/ my first chebby --------------

Thought I'd post that part# to save people from doing just that.