Unfortunately I need to sell my dart project.
I bought the car 3 years ago and have been working on it sense.. Was going to make it a Pro Street car.. Car was completely stripped and media blasted. New AMD right and left quarter panels were installed as was a new trunk floor and trunk/quarter extensions. The floor and frames and amazing condition and never have been patched. I have over $16,000 in just parts in this car.. Great deal.. Doesn't have a lot of the parts that were taken off it but I have a great inventory of dart parts that I have available for extra..
Stuff Included and or on the car
AMD Inner Fender Splash Shields-
New Wind lace-
New Hotchkiss Adjustable Strut Bars-
New AMD rear window trim-
New AMD drip rail trim-
Rear AMD tail light support-
Front Window trim clips-
New AMD front window trim-
New AMD drivers quarter-
Front US car tool core support brace-
Front US car tool inner fender braces-
New AMD Passenger quarter-
New AMD trunk/quarter extensions-
New PST idler Arm-
New PST Pitman arm-
New PST tie rod ends-
New PST tie rod sleeves-
New RMS spring relocation boxes
New AMD door hinges-
New AMD door strikers-
New Trunk Pan-
Fresh Bored .30 over 440 block
A body nice used center link-
SPC Adjustable Upper control arms-
QA1 tubular Performance lower control arms-
QA1 tubular K frame-
Strange Front disc brake setup-
PST 2” Drop Spindles-
PST torsion bar adjusters-
DMT Torsion Bar Boots and clips-
NEW PST Lower Ball Joints-
Wilwood Polished 1" Bore Master Cylinder and prop. Valve-
Ball Joint Bolts and hardware-
Wilwood Brake pedal assembly-
¾” spindle nuts and washers-
Caltrac Split Mono Leafs-
Caltrac Leaf Spring Shackles-
Caltrac Inboard caltrac bars -
Caltrac rear shocks-
and much much more that I am forgetting.. Plus some parts that originally came off the car
The car was being built as no shortcuts taken and no expense spared and was shooting for show quality. The cowl vents were shaved as were the marker lights and multiple holes in the engine compartment.
The wheel tubs were removed and trimmed and smoothed to the frame rails as we were going to put in custom mini-tubs..
Please ask if any questions or need for any more pictures.. I will start off pics at the beginning during the body work phase.
Thanks a lot.. Price is $10,000 OBO!! Make a offer.. car is a honest car.
Call or Text 1-802-735-8369 , PM here or email [email protected]
car is located in Georgia,Vt 05454
Will trade for a nice Mopar driver.. Must be drivable and inspected and v8
I bought the car 3 years ago and have been working on it sense.. Was going to make it a Pro Street car.. Car was completely stripped and media blasted. New AMD right and left quarter panels were installed as was a new trunk floor and trunk/quarter extensions. The floor and frames and amazing condition and never have been patched. I have over $16,000 in just parts in this car.. Great deal.. Doesn't have a lot of the parts that were taken off it but I have a great inventory of dart parts that I have available for extra..
Stuff Included and or on the car
AMD Inner Fender Splash Shields-
New Wind lace-
New Hotchkiss Adjustable Strut Bars-
New AMD rear window trim-
New AMD drip rail trim-
Rear AMD tail light support-
Front Window trim clips-
New AMD front window trim-
New AMD drivers quarter-
Front US car tool core support brace-
Front US car tool inner fender braces-
New AMD Passenger quarter-
New AMD trunk/quarter extensions-
New PST idler Arm-
New PST Pitman arm-
New PST tie rod ends-
New PST tie rod sleeves-
New RMS spring relocation boxes
New AMD door hinges-
New AMD door strikers-
New Trunk Pan-
Fresh Bored .30 over 440 block
A body nice used center link-
SPC Adjustable Upper control arms-
QA1 tubular Performance lower control arms-
QA1 tubular K frame-
Strange Front disc brake setup-
PST 2” Drop Spindles-
PST torsion bar adjusters-
DMT Torsion Bar Boots and clips-
NEW PST Lower Ball Joints-
Wilwood Polished 1" Bore Master Cylinder and prop. Valve-
Ball Joint Bolts and hardware-
Wilwood Brake pedal assembly-
¾” spindle nuts and washers-
Caltrac Split Mono Leafs-
Caltrac Leaf Spring Shackles-
Caltrac Inboard caltrac bars -
Caltrac rear shocks-
and much much more that I am forgetting.. Plus some parts that originally came off the car
The car was being built as no shortcuts taken and no expense spared and was shooting for show quality. The cowl vents were shaved as were the marker lights and multiple holes in the engine compartment.
The wheel tubs were removed and trimmed and smoothed to the frame rails as we were going to put in custom mini-tubs..
Please ask if any questions or need for any more pictures.. I will start off pics at the beginning during the body work phase.
Thanks a lot.. Price is $10,000 OBO!! Make a offer.. car is a honest car.
Call or Text 1-802-735-8369 , PM here or email [email protected]
car is located in Georgia,Vt 05454
Will trade for a nice Mopar driver.. Must be drivable and inspected and v8
