Mopar 318 throttle linkage

[twodog45]

So I'm getting to the end of things I need to figure out on my 64 cuda with a dodge d100 72 318 with a904 automatic.
The guy i got project from had sold the intake and carb...unfortunately that mean all the throttle linkage is gone.
I bought an intake and on top of that is the quadrajet 4 barrel.
Does anyone have a picture of the linkage I need for throttle cable and kick down?
Is there an aftermarket one?

 

[junkyardhero]

here's the bracket

Mancini Racing - Throttle Cable Bracket

i don't know what you're starting with kickdown wise, but if it's stock 64~66 you'll need to mod it or switch/adapt later stuff.

 

[twodog45]

The kick down part looks like a rod coming from transmission

 

[twodog45]

Do you happen

 

[twodog45]

Do you happen to have a picture of side of carb with linkage?

 

[Bob67Barracuda]

Yours was pretty much my set up. Had the original linkage bracket from carb to the kick down but it was sloppy and stopped working. The after market improvement was the kit above. This on a 340 with Edelbrock 4bbl and automatic tranny.

 

[George Jets]

And here is a pic of a 727 up to 318 Edelbrock 4bb setup.

☆☆☆☆☆