[SOLD] Mopar Perf. R3 complete stroker short block kit new

[Dartman440]

This is a new complete R3 shortblock from a few years ago. The block is # P4532909 . bored to stock 340 bore specs 4.04. All machining to the block is done. Cam bearings, etc. Crank is a new Mopar forged 3.79 Stroke. New Childs and Albert Track Master SR Rods. 6.125 length. Pistons and rings are Wiseco 12:1 flat tops with exhaust valve relieve. Fluid Dampener. All new mains and rod bearings. Arrow Racing timing cover for the R3. Crank Assy needs to be balanced. $3900. for all short block. I can deliver to Norwalk this Friday only if desired. And I will be at Mopars at the Red Barns on Saturday at the Gilmore Museum at Battle Creek, Mich.

 

[cannucky]

If nobody jumps on this then PM me and we'll figure out how to ship it . I may be able to get someone to pick it up as well , any chance your going to Moparfest?

 

[Dartman440]

I am 20 minutes from the Ambassador Bridge, Windsor ,Ontario. Not sure where Mopar Fest is or when.

 

[cannucky]

Moparfest is the biggest and oldest all Mopar show in Canada and compares to the Nats with over 2000 registered cars most years and a couple of hundred vendors , it's the 3rd weekend of August in New Hamburg Ontario , about an hour or so from Sarnia/Port Huron , Where can I research a little more info about this part number because it doesn't appear in the Performance Parts Catalog with the rest of the R3 blocks ? I talked to CWatts here on FABO and he is still travelling back and forth between Michigan and Ontario at least once a month so if this checks out as what I'm looking for I can probably get him to meet you somewhere for pick up. I need to know about deck height and valve angle etc...plus I would like to see some more picks of the block and bores if you have them .

 

[R/TErnie]

Will you crate it all to be shipped? If you get me dimensions and weight I can have it shipped to my location.

Very interested! Do you take paypal?

 

[Dartman440]

Will you crate it all to be shipped? If you get me dimensions and weight I can have it shipped to my location.

Very interested! Do you take paypal?

I just want you to know it is not assembled. It is all in parts. I have a friend who has a paypal acct. If still interested I can crate and box it all up. Thanks,

Dean

 

[340_Dart]

Can we get some more pictures of the block specifically? Part #, lifter valley, front on view?

 

[bbrroowwnn]

Can we get some more pictures of the block specifically? Part #, lifter valley, front on view?

yeah. how much for just the block itself?

 

[Dartman440]

I will have all the engine parts at the Mopar Nationals in Columbus this Thursday thru Saturday until 4Pm. I can take some of the lifter galleys later today. Mopar part Number is P4876793. I have the original bill of sale from the dealer.