Mopar Performance Crankshaft for 416

-
T

TnDodge

Member
Joined
Sep 19, 2012
Messages
13
Reaction score
6
Location
tennessee
hey guys, looking at a stroked Duster and it has a Mopar performance heavy duty crankshaft (p5007256) in it. Probably a dumb question but is this crankshaft actually made by Mopar? Or is this made by Eagle or Scat?

Just curious because i remember hearing about some of the Chinese Eagle cranks breaking. Thanks
 
thanks guys. dang it, was hoping that wasn't the case. Just remember reading about some Eagle cranks breaking
 
the scat cast racing crank is an excellent piece i have been running one for ten years at 530 hp and a 100 shot there is one guy i know of is at 697 hp natural .
 
is the SCAT the same as this one? Mopar performance heavy duty crankshaft (p5007256)
 
IIRC, it was the 4.0 cast crank from Eagle that had a problem. Someone correct me if I’m wrong.

The forged cranks from Eagle and Scat have proven to be just fine.
 
rumblefish360 said:
IIRC, it was the 4.0 cast crank from Eagle that had a problem. Someone correct me if I’m wrong.

The forged cranks from Eagle and Scat have proven to be just fine.
Click to expand...

yes, the Eagle cast cranks had issues years ago. I broke one going 10.30’s in a heavy car. But it had been beat on 4 seasons at less power before letting go.
Not sure if they are better now or not, this was almost 20 years ago.
 
You must log in or register to reply here.
-

Back
Top