[WANTED] Mount mounts for 67 273 barracuda

[TheCudaKid]

i’ve already ordered a A body barracuda engine motor mount kit, but I’ve come to the conclusion that there is a difference between years and I think my motor mounts are a single year part for the 67s only so whatever help and suggestions will be greatly appreciated thank you.

 

[Professor Fate]

i’ve already ordered a A body barracuda engine motor mount kit, but I’ve come to the conclusion that there is a difference between years and I think my motor mounts are a single year part for the 67s only so whatever help and suggestions will be greatly appreciated thank you.

I assume you mean the brackets, since the insulators are all the same '67-'72.
This thread shows the difference, later brackets up to '72 can be easily modded to work (as long as they're not 340/360 brackets).
1967 only SB right side engine mount bracket vs 68-72

 

[MidnightSwinger]

i’ve already ordered a A body barracuda engine motor mount kit, but I’ve come to the conclusion that there is a difference between years and I think my motor mounts are a single year part for the 67s only so whatever help and suggestions will be greatly appreciated thank you.

I’ve got a set from my 67 commando, if you need them I’ll sell them to you but I don’t personally know of any difference vs a 318 mount/bracket.

 

[Dana67Dart]

Mounts ( the metal part) is mostly engine specific till 73.

After 73 they are a different rubber mount.

273/318 use the same mounts

340/360 use the same mount but different than 273/318

383/440 use a different mount different than all the others.

 

[Bodyperson]

i’ve already ordered a A body barracuda engine motor mount kit, but I’ve come to the conclusion that there is a difference between years and I think my motor mounts are a single year part for the 67s only so whatever help and suggestions will be greatly appreciated thank you.

Motor mounts are different than motor brackets. 67 is not a specific year so to speak. They are concerning the suspension idler arm.

 

[doug 371]

I’ve got a set from my 67 commando, if you need them I’ll sell them to you but I don’t personally know of any difference vs a 318 mount/bracket.

View attachment 1716319109

You can see the rear bolt is in the lower lug of the block...that is the difference

 

[Cuda Al]

On a 273/318 the 67 only bracket isn't an issue.
You can use any 67-72 brackets on any 67-72 273/318


Alan

 

[doug 371]

I’ve got a set from my 67 commando, if you need them I’ll sell them to you but I don’t personally know of any difference vs a 318 mount/bracket.

View attachment 1716319109

Can you show a pic of the other side?

 

[TheCudaKid]

I’ve got a set from my 67 commando, if you need them I’ll sell them to you but I don’t personally know of any difference vs a 318 mount/bracket.

View attachment 1716319109

i will buy them

 

[MidnightSwinger]

Can you show a pic of the other side?

I’ll post it up when I get home from work today.

 

[MidnightSwinger]

Can you show a pic of the other side?

 

[doug 371]

You can see the rear bolt is in the lower lug of the block...that is the difference

I think I'm wrong...I have no idea. It's the 340 ones that bolt to the top lug

 

[MidnightSwinger]

i will buy them

$100 shipped, I sent you a PM.

 

[Dana67Dart]

I think I'm wrong...I have no idea. It's the 340 ones that bolt to the top lug

I'm pretty sure the 340 for the pass side is top - top - front bottom.
(freeze plugs relocation)

Vs

273 318 which is top - top - rear bottom