Mystery plug on Honda Generator

-
Brooks James

Brooks James

VET, CPT, Huey Medevac Pilot
FABO Gold Member
Joined
Dec 12, 2020
Messages
5,257
Reaction score
3,513
Location
Fruitland Park Fl
I'm aware that it's 220

What are the applications for it

Was told it's for marine application

17277009669291628711797546999784.jpg
 
You can break that out into two 110 circuits.

Or you can run a welder, etc.

You can even back feed your house panel if you know what you're doing.
 
The receptacle says 30Amp 125 Volt. Get a tester and check it while its running. At 1st glance one would think 220 but I don't think so.
 
The operating instructions should be found on Google. It appears that you have two separate 125 volt circuits based on the reset buttons and that pole plug would be used for 220 volt applications. I agree with YY1 in that there are ways to power your home with a generator if you know what you’re doing. FYI, if you don’t do it right you could electrocute a lineman trying to restore electricity in your area.
 
Last edited:
Hmm....Those 4 prong single phase twist plugs are usually 120/240v. Houses need both voltages when feeding a transfer switch. (stoves 120/240, water heaters 240, household plugs 120 etc)
 
In most houses, half of the 120v circuits are on one phase, the other half on the other.
 
You must log in or register to reply here.
-

Back
Top