[SOLD] Mystery SB Valve Covers & Rubber Gaskets

-
Status
Not open for further replies.
Oldschoolcuda

Oldschoolcuda

Early-A Body Nerd
FABO Gold Member
Joined
Mar 24, 2008
Messages
5,454
Reaction score
3,562
Location
Chesapeake, Va
Rating - 100%
101   0   0
Contact seller
These were on the 340 in my 65 cuda when I got car in 2005. Ran for 2yrs. then removed and have sat in box since. Painted with black wrinkle,no dents but couple bolt hole repairs .They never leaked. No idea what yr. they are so you can have cheap. May even be two passenger units but they look cool on an orange SB and would as well on a red or blue one. PCV valve is new.
Thanks as always for the interest.

SB valve covers and gaskets $40 obo plus shipping

IMG_0505.JPG


IMG_0506.JPG


IMG_0507.JPG


IMG_0509.JPG


IMG_0510.JPG


IMG_0511.JPG
 
The one with the PCV grommet is between 67-69....

Interesting combo... You can run the rubber grommet PCV cover on pass side, then use stove pipe cover for driver's side with oil breather.... Slick...
 
krazykuda said:
The one with the PCV grommet is between 67-69....

Interesting combo... You can run the rubber grommet PCV cover on pass side, then use stove pipe cover for driver's side with oil breather.... Slick...
Click to expand...

Exactly how I had them.These are nice units on the cheap for a modded setup.
Having wiring harness holders on drivers side also worked great for my temperature gauge probe and electric fan wiring. Good clean look.
 
They are 66-9 standard small block covers. I have a set on my 340 and the original set still on my original 273 engine from my 67 Valiant.

Picture 3326.jpg
 
Status
Not open for further replies.
-

Back
Top