Need pics of springs moved 3" in on A-body?

[wkroncke17]

Could anyone take pics and show me the finished product of what the frame and the spring hangers will look like in the front and the rear when using the kit to move the springs inward 3 inches?
Thanks!!!
Wally.

 

[AdamR]

Here you go.

 

[fishy68]

Here's a real good page on BBD about moving springs inboard. Has some good pics too.

http://www.bigblockdart.com/techpages/springs.shtml

 

[wkroncke17]

Pics and article are great!! Thanks so much guys!!!
Is it better to cut both sides of the frame,or just the inner side?
Wally.

 

[rumblefish360]

Hummmmmmm, I'd cut the whole thing instead of just one side. Weld both sides up for great strength

 

[fishy68]

I agree with Rumble. Not sure why you'd want to just cut one side. Plus I like the idea of being able to run a round rod through the original springs perches so you make sure to get things lined up good. Cutting both sides out makes that easier.

 

[crackedback]

Drill and plug weld, tie the bottom edge together.

As far as lining everything up with the one side still there, no problem.