Mgc340
Well-Known Member
Brand new 340 replacement block
4 bolt mains
59’ tall deck
Edelbrock heads #60779
65 cc
11/32 valves
2.02 in 1.60 ex
Stage 1 port job by Hughes
1.5 Hughes roller rockers
Forged Keith black flat top pistons 4.030 bore
10:8:1 compression
1/16-1/16-3/16 ring set
Scat H beam rods
4” forged stroker crank
Hughes springs
Comp lifters
Comp pushrods
All arp fasteners through out, studs etc
Edelbrock Air gap intake
Sfi approved damper
All new timing chain- cover
Comp cam, see cam card in pics
Clevite HP bearings
Zero deck block
Align honed
Bored and hone w/torque plate
This motor was built to make around 500 hp and still be street driven. All new parts! No used parts to build this motor! Never fired brand new!
Will ship via Fastenal hardware stores for around $150 through out the . Or pick up available in Sioux Falls, SD
$9500 obo, well over 12k in this build
Felpro gaskets
MLS head gaskets
4 bolt mains
59’ tall deck
Edelbrock heads #60779
65 cc
11/32 valves
2.02 in 1.60 ex
Stage 1 port job by Hughes
1.5 Hughes roller rockers
Forged Keith black flat top pistons 4.030 bore
10:8:1 compression
1/16-1/16-3/16 ring set
Scat H beam rods
4” forged stroker crank
Hughes springs
Comp lifters
Comp pushrods
All arp fasteners through out, studs etc
Edelbrock Air gap intake
Sfi approved damper
All new timing chain- cover
Comp cam, see cam card in pics
Clevite HP bearings
Zero deck block
Align honed
Bored and hone w/torque plate
This motor was built to make around 500 hp and still be street driven. All new parts! No used parts to build this motor! Never fired brand new!
Will ship via Fastenal hardware stores for around $150 through out the . Or pick up available in Sioux Falls, SD
$9500 obo, well over 12k in this build
Felpro gaskets
MLS head gaskets
