dustoff440
Well-Known Member
New Proform 67101c Carb Body. Designed as a direct replacement for the Holley 750 vacuum secondary #3310 carbs. Advertised to flow 830 cfm. Will work with other models that have 1 3/4 throttle blades.. I had installed and discovered that the secondary throttle shaft bushings in the throttle plate were marginal at best and decided to go in a different direction with a 650 double pumper I have. This is for a vacuum secondary NOT a double pumper carb.
I would like to get $50($50 includes shipping anywhere continental US) for it OR trade for a NEW kit for a #4777 Double Pumper 650 Holley. I shopped around and have seen kits for as low as $35. Don't need a master blaster kit with needle seats or floats, just need the basic kit with gaskets, accelerator pump diaphrams and so on. Last time I priced the 67101c Proform Carb body the cheapest I could find was Jegs @$97 plus shipping so this would be a really good deal for someone.
Thanks for looking.
I would like to get $50($50 includes shipping anywhere continental US) for it OR trade for a NEW kit for a #4777 Double Pumper 650 Holley. I shopped around and have seen kits for as low as $35. Don't need a master blaster kit with needle seats or floats, just need the basic kit with gaskets, accelerator pump diaphrams and so on. Last time I priced the 67101c Proform Carb body the cheapest I could find was Jegs @$97 plus shipping so this would be a really good deal for someone.
Thanks for looking.
