fishy68
Tyr Fryr's Inc.
For sale is a new set of valve springs that were on a set of heads a buddy of mine had. They were never ran but were installed. They also come with a set of good used 11/32" retainers (7*) that provide a extra .100" installed height. We don't know what brand the springs are but I measured them and here are the specs.
155 LBS. at an installed ht. of 1.9"
315 lbs. at .600 lift and they are good up to .650 lift.
The o.d. is 1.46" and the i.d. is 1.07"
The retainers are for 11/32 valves.
You can use these on a big block if you use standard ht. retainers that you provide or you can use them on small block heads that have the spring pockets cut to 1.8"
Asking $75 shipped.
Pm me if interested.
155 LBS. at an installed ht. of 1.9"
315 lbs. at .600 lift and they are good up to .650 lift.
The o.d. is 1.46" and the i.d. is 1.07"
The retainers are for 11/32 valves.
You can use these on a big block if you use standard ht. retainers that you provide or you can use them on small block heads that have the spring pockets cut to 1.8"
Asking $75 shipped.
Pm me if interested.
