I got some offset spring shackles from an old motor head over the weekend. He is restoring a 68 Z28 Camaro. He had some Mopar stuff he was selling off and these were mixed in.
He said they were old Direct Connection parts, but was not sure. I'm still waiting on the DoctorDiff kit but my patience is wearing thin. I made a post about the spring relocation location using sliders, which worked out OK, but I'd really to use the stock type hangers for another car I'm working on.
The offset is more like 1.25 and at about 3.75" eye to eye compared to the stock shackles which are 3.5". I'm going to section the big one and try to make a small one
My question is, does anyone know the measurements or have one for reference to do a 1/2" offset shackle?
He said they were old Direct Connection parts, but was not sure. I'm still waiting on the DoctorDiff kit but my patience is wearing thin. I made a post about the spring relocation location using sliders, which worked out OK, but I'd really to use the stock type hangers for another car I'm working on.
The offset is more like 1.25 and at about 3.75" eye to eye compared to the stock shackles which are 3.5". I'm going to section the big one and try to make a small one
My question is, does anyone know the measurements or have one for reference to do a 1/2" offset shackle?
