Oil pan Measurement

[plumkrazee70]

Does anyone know the width rail to rail of a SB oil pan?

I am going to be building an engine dolly (This one) but don't have an oil pan to test fit.

Thanks!

 

[ScampMike]

I, for one, do not - might I suggest a 1/2 min under you car with a tape measure... I'm not trying to be an ***, it just seems like the most direct way to get it right..

 

[Ben Drinkin]

right at 9 3/8 inches, bolt center to bolt center..

 

[plumkrazee70]

right at 9 3/8 inches, bolt center to bolt center..

Perfect. Thanks very much.

 

[plumkrazee70]

I, for one, do not - might I suggest a 1/2 min under you car with a tape measure... I'm not trying to be an ***, it just seems like the most direct way to get it right..

No offense taken. I had that in mind, however I wasn't sure if I could get an accurate measurement.

Looks like I got what I needed. Thanks Again, Ben.

 

[Ben Drinkin]

Looks like I got what I needed. Thanks Again, Ben.

No problem at all.. Just happened to have the pan at work with me..