D Dizzydean Well-Known Member Joined Mar 26, 2007 Messages 892 Reaction score 34 Location Richland (Tri Citys) Wash Mar 4, 2011 #1 Any leads on where to get the oil slinger for the crank? Somehow, somewhere it got lost.
cudamark Well-Known Member Joined Mar 14, 2009 Messages 11,833 Reaction score 3,493 Location San Diego Mar 4, 2011 #2 A slinger from just about any early Mopar engine will work....slant 6, small block, big block.... I'm not sure about the magnums though.....
A slinger from just about any early Mopar engine will work....slant 6, small block, big block.... I'm not sure about the magnums though.....
George R Mopar Nutcase Joined Oct 29, 2007 Messages 2,646 Reaction score 69 Location Trumbull, CT Mar 4, 2011 #3 It was still available from the dealer as of 2009, but you'll need the part number as their own computers didn't go back that far. George
It was still available from the dealer as of 2009, but you'll need the part number as their own computers didn't go back that far. George
D Dizzydean Well-Known Member Joined Mar 26, 2007 Messages 892 Reaction score 34 Location Richland (Tri Citys) Wash Mar 4, 2011 #4 Thanks guys I posted on the other site and am going to get one from Doc.
