Parting 65 Barracuda 225/3 speed manual

-
Status
Not open for further replies.

gotcha

55 Years of Mopar
Joined
Apr 14, 2008
Messages
78
Reaction score
19
Location
Cabot, AR
Rating - 100%
4   0   0
Contact seller
Fellow Early A Body lovers. I will be parting a 65 Barracuda in the coming weeks. If you need something, please let me know. Typical early A body rust in quarters, hood, and trunk. Both front fenders are good, front bumper is good, but needs rechrome, all glass is good. Trim is all there. Seats are good, but need recover, 3 speed on the column (manual), so manual pedal assembly is there, back seat hardware, seats, wooden divider, door panels are useable, grill is good, headlight buckets, hood latch, rear trim (3 pieces) are there. Can cut out radiator support, inner fenders, all suspension is good, torsion bars and mounts,etc. 7 1/4 is good. Brake parts, anything you need. Rear window, and all glass is good. Tail light surrounds are pitted but good for a driver. All the stuff will be on Ebay, but if you need something early, post or PM. The 225 was running previously, but has sat for 2 years. 3 speed manual trans is available. All this stuff will be reasonable. Shipping will be additional. Located in Cabot, AR. Right outside Little Rock. North about 16 miles on 167/67. $5 to $200. Too much to list...so let me know if there is a part you need. I bought this for a couple of things I needed to finish my Altered Wheelbase 65 Barracuda. The rest is for sale. Thanks for the post.
 
All PM's answered. Will check Drivers side airbox, and I do not expect much on the floor pans. I will look closely today and post. Car is still on my trailer, so I can see the underside pretty well. Will let you know 33 Dodge.
 
Grill from side to side and hood to bumper has been sold.

Trunk hinges have been sold.

Will keep everyone posted on sales.

Thank you.
 
Status
Not open for further replies.
-
Back
Top