parting out 1966 barracuda

[sabre.mill]

No one wanted to buy the car so it is time to split it up. What do you need ? let me know i may have it . this was a 273 , 904 car engine is long gone , i do have the 904 tranny , and some other engine parts . I have not done much selling of parts on here so guys bare with me , i hope i don't get lost or confused with the bumps ? and the pm's ? not to sure what all that means but here goes . I do have a pay-pal account . All parts are plus shipping from 46783 (which is in IN). Or you can pick up the bigger items,
904 tranny - 100.00 pt.# 2538338 w
radiator - 75.00 pt.# 2582931
distributer - 25.00 pt.# 2642238-25-5
orange valve covers some surface rust - 35.00
hood - 140.00
washer pump - 15.00 pt.#2496152 don't no if works
driver door - 70.00
pass. door - 70.00
trunk lid - 80.00
rear bumper - 150.00 nice
front bumper - 150.00 nice
All the sheet metal has some surfaces rust due to car has been striped to bare metal
drivers front fender - 70.00
pass front fender - 70.00
front 1/4 windows -60.00 pr
rear 1/4 glass - 80.00 pr tinted
drivers door glass - 40.00 tinted
pass. door glass - 40.00 tinted
trunk extentions - 100.00 pr for 67-76 a-body year one
front grill right and left and center sections - 180.00
instument cluster - 225.00 gauages look good
rocker trim - 150.00
perportioning valve - 30.00 SOLD
front floor pan driver side and pass. side think they have been modified to fit the 66 floor -90.00 for 67-76 a-body year one
Have lots of other parts and a lot of pics , i can even get more pics of what ever you want , let me know what you need ? If there are any ?'s about anything or any parts just ask i will explain it to the best of my ability and show pics . And please bare with me !! have lots of interior parts also and some trim pieces too . Here are sum pics to start things off

 

[sabre.mill]

more pics
wipers and arms- 35.00 good condition
dash vents -15.00 SOLD
cigarette lighter and houseing - 25.00 good cond.
interior door handle and window cranks set of six - 40.00
rear trim below back window -120.00
wiper motor and trans - 60.00 dont know if works
power sterring gear box - 70.00
power brake booster - 50.00 SOLD
all these prices are plus shipping ,

 

[swing69]

PM sent on vents and gas pedal (if you have it) and v8 centerlink (if you have it)

 

[retractable]

PM sent

 

[sabre.mill]

gas pedal w/cable SOLD
the top lenses in the tail lites are SOLD
the other lenses are aval. and housings

 

[66FormulaS273]

Do you have the vacuum canister that sat on the left front fender of the engine bay and the aluminum spears on the quater panels. Condition price and pictures please.

Thanks

 

[sabre.mill]

upper tail light lenses SOLD
power brake booster SOLD

 

[sabre.mill]

the vacum canister not sure have to look do not have the canister
the spears pretty sure i have get pics tomarrow pics are posted
thanks

 

[sabre.mill]

vent windows -60.00 pr as requested
rear 1/4 glass - 80.00 pr tinted
front bucket seats w/ tracks -100 pr
front bumper -150.00

 

[hollywood hig]

those bumpers will fit a 66 valiant won't they? if there the same let me know... i believe they are.......
higgs

 

[EDDNIE]

I see you have the trim below rear window listed, do you have the 2 interior pieces that covered mounting studs ? Thanks, Ed

 

[sabre.mill]

here are the pics of the driver side 1/4 window
the alum. spears i think these are what you are looking for 100.00
speed-o cable 25.00
v-8 center link 60.00 SOLD
all parts plus shipping thanks

 

[sabre.mill]

those bumpers will fit a 66 valiant won't they? if there the same let me know... i believe they are.......
higgs

i'm not sure have to do some research

 

[sabre.mill]

I see you have the trim below rear window listed, do you have the 2 interior pieces that covered mounting studs ? Thanks, Ed

i'm not sure if i do the back of the car was stripped and put into boxes so i don't know what i'm looking for , but i will give it a shot lookin tomarrow

still looking for them

 

[sabre.mill]

i had a friend look up somethings on the bumpers they should work , it sounds like 66 dart ,valiant , and cuda are the same . double check to make sure ,they should work . Any one can put there two cents in to help out 66 cuda bumpers work on 66 valiant ?

 

[66cuda-s]

PM on the proportioning valve.

 

[cosgig]

66 Valiant and Cuda use the same bumpers. Geof

 

[66340SEDAN]

Those bumpers WILL fit a 1966 Valiant and Barracuda only, no Dodge Darts.

 

[hollywood hig]

yeah, i was pretty sure they interchanged, (barracuda and valiant) looked at mine there identical, except for the bumps and bruises that mine have.......lol, thanks for the input 66340.....
higgs

 

[swing69]

Here is a V8 centerlink and a S6. I think yours is the correct V8 link. If you put a straight edge across the top of the link and measure down to the top of the crossbar, there should be ~ 1.5" drop. S6 bars are ~.75".

 

[sabre.mill]

PM on the proportioning valve.

SENT 12-18-10 Thanks

 

[sabre.mill]

PM sent on vents and gas pedal (if you have it) and v8 centerlink (if you have it)

Sent 12-18-10 Thanks

 

[66cuda-s]

I received the Proportioning Valve today. As advertised. Thanks!!!

 

[66cuda]

DO you have the dished round piece and wing nut and long bolt that holds the spare tire cover down and holds the spare tire down??

 

[fstfish66]

i had a friend look up somethings on the bumpers they should work , it sounds like 66 dart ,valiant , and cuda are the same . double check to make sure ,they should work . Any one can put there two cents in to help out 66 cuda bumpers work on 66 valiant ?

1966 barracuda and valiant bumpers are the same,,,the dart is different,,,