Brad426
Well-Known Member
I'm putting a Powerdyne BD-11 on my stroker 408. Just because I have it. I got to thinking about boost preassure mode. An average psi for a BD-11 is 6 to 9 psi, not much. When the BD-11 starts making positive preasure (boost) what stops the presurized charge from leaking out at other sources like the power brake booster, PCV valve or ither places? My engine does not have vacuum advance (MSD). I have connections to the fuel pressure regulator, vacuum/boost guage, MSD controller, power brake booster, PCV system and BOV (VW).
