Ported Edelbrock SB top end kit

[darndart]

Hello, I have a set of ported Edelbrock Performer RPM Small Block heads with Comp Cams 1.5 Roller Rockers, Comp 943-16 solid roller springs. I bought the heads from Pro-Street Performance Yorkton SK, I don't have flow sheets but told they flowed 285/205. Fresh from machind shop, never ran since. I saw them run on a 410ci all steel 71 cuda that ran 6.60's 1/8th mile. Also included is a new, never bolted down Edelbrock Super Victor. Heads were $1450, $700 port job, Rockers $550, Comp springs $330, Super Vic $340, almost $3400 to duplicate this kit. I'm looking for $2300 plus shipping.

Cuda that I got the heads off of, making a pass!

 

[Brad G]

pm sent

 

[forced 340]

good deal! 71' cuda?????

 

[briankaplan]

Hell of a deal! Wish I had the money.

 

[69MOPE]

I would like to be next in line for buying.

 

[darndart]

good deal! 71' cuda?????

72 Actually, with 71 Billboards!

 

[darndart]

$2200 shipped to the lower 48 for everything, I've got new Indy's on the way!

 

[crackedback]

Open or closed chamber?

 

[darndart]

Open or closed chamber?

Closed Chamber!

 

[winstoninwisc]

bump nice deal lost your # this for an la motor or a magnuim

 

[K.O. SWINGER]

I wish ...very NICE

 

[darndart]

bump nice deal lost your # this for an la motor or a magnuim

LA motor

 

[darndart]

Now with brand New Comp retainers, locks, spring cups, & 950-16 springs.
$2200 shipped!

 

[pettybludart]

Heck of a deal.I know what I have in my $$$setup.GLWS

 

[swinger340]

What kind of lift are the springs good for?

 

[darndart]

What kind of lift are the springs good for?

Comp doesn't rate their springs for lift, but they are a dual spring for hydraulic or solid flat tappet. I would say they should easily handle a cam with .550-.600 lift.

 

[70aarcuda]

http://www.summitracing.com/parts/cca-950-16


http://www.summitracing.com/parts/cca-950-16/applications

 

[70aarcuda]

What kind of lift are the springs good for?

take the installed height.....subtract the coil bind height....

and figure in .060 for safety on the coil bind...

example....

eddy head usually installed height at 1.800 - 1.200 coil bind...equals .600 lift.

 

[Baxter61]

Guys dont ruin this for me, i dont get my bonus for 3.5 weeks!

 

[darndart]

Sale pending!

 

[73slayduster]

Please let me know if sale falls through. Thanks

 

[darndart]

Please let me know if sale falls through. Thanks

Will do. I'll know by next Wed.

 

[illcuda65]

PM'ed you as well if deal falls through

 

[darndart]

Sold!