I have a set of Speedmaster heads with 2.02 Speedmaster intake valves that I’m almost finished with and will be on the flowbench Lord willing this week. (Possibly tomorrow) they will flow in the 285-291cfm area and will have a 4-5 angle valve job. I bought these heads bare so for now no valve springs, retainers, or keepers are included. I have so used ones that may fit your application that I will price fairly. Our you could drop ship them here or use yours. I’m listing these here first at a lower price then they will be going on Facebook marketplace
600.00 two bare Speedmaster heads.
850.00 porting, valve job, flow testing.
100.00 intake and ex valves.
1550.00
If you want the spark plug holes relieved 80.00 (member price 50.00)
Viton seals 25.00
20.00 app hardened valve spring shims.
If you want them without being assembled 50.00 off. If you are local and don’t need them shipped 50.00 off
This is plus shipping from Freeport Pa. 16229. I have a few upcoming races in Ohio so if paid for in advance I can deliver to track. Thanks.
I will update with flow numbers asap and include chamber pictures
600.00 two bare Speedmaster heads.
850.00 porting, valve job, flow testing.
100.00 intake and ex valves.
1550.00
If you want the spark plug holes relieved 80.00 (member price 50.00)
Viton seals 25.00
20.00 app hardened valve spring shims.
If you want them without being assembled 50.00 off. If you are local and don’t need them shipped 50.00 off
This is plus shipping from Freeport Pa. 16229. I have a few upcoming races in Ohio so if paid for in advance I can deliver to track. Thanks.
I will update with flow numbers asap and include chamber pictures
Last edited:
