Pre purchase opinion on these tire and wheels used please

-
Junior340

Junior340

FABO Gold Member
FABO Gold Member
Joined
Aug 26, 2016
Messages
580
Reaction score
792
Location
Caldwell,Idaho
I have been looking for something different to put on my `67 Dart, and these used ones popped up for sale but offset looks wrong for me. He had them on a `72 mustang.
My Dart is BBP 8 3/4 drum with factory later model disc in front. No body or suspension mods. Not too worried about the tires but they look nice but mainly the wheels.

15x8
3.5 back spacing
245/60r15
8" wide tread
26" tall

15x7
3.5 back spacing
205/r15
7" wide thread
25" tall
20210325_084850.jpg
 
Junior340 said:
I have been looking for something different to put on my `67 Dart, and these used ones popped up for sale but offset looks wrong for me. He had them on a `72 mustang.
My Dart is BBP 8 3/4 drum with factory later model disc in front. No body or suspension mods. Not too worried about the tires but they look nice but mainly the wheels.

15x8
3.5 back spacing
245/60r15
8" wide tread
26" tall

15x7
3.5 back spacing
205/r15
7" wide thread
25" tall
Click to expand...

the 205 will fit no problem
the 245 probably will be very, very close because of the shallow offset.

depending on the wheel you may need to open up the center(hub) register because mopar is bigger than ford.
 
Off the hip, the rears will not fit if you have an A-Body 8-3/4 converted to BBP with B/C/E drums. I don't know if they will fit if you have drilled A-Body axles and drums. On my car with an A body 8-3/4 converted with BBP axles for B/C/E drums I run a 17x8 with 5.25" on backspace (19mm offset) and a 245/45/17 and its close enough to the inner fender lip to need it rolled and about 1/2 from the leaf spring in the stock location.

Front could work but will probably be flush with the outside of your fender. The later disc spindle widens the front track about 3/8" per side. With an A-Body spindle on my car I run a 17x7 with a 4.75" back space (19mm offset) and it tucks in and doesn't rub. Could probably go to a 4.5" back space if 7" wide.

Below is my car with the sited wheels installed.

GTS1.jpg
 
15x8's probably won't fit the rear and the offset isn't enough. 4-4.5 backspace is what Mopars like. 7" wide with a 4"+ backspace is about all they can handle without some trimming or lip rolling.

002.JPG
 
Last edited:
Sounds like they are not a way to go, which is fine I keep looking. I have looked at many threads on here and need to stick with the sizes you guys recommend.

I appreciate the positive input.

Thanks
 
When I did my car I found you have few options so you end up with either custom rims or off the shelf and spacers, unless with the rear a custom rear housing and axles to fit a certain wheel and tire but the front is difficult to alter to make wheels fit.
 
You must log in or register to reply here.
-

Back
Top