Pulleys

-
swedefish

swedefish

Well-Known Member
Joined
Oct 24, 2006
Messages
1,843
Reaction score
267
Location
Sweden
I've got this 360 LA engine in my -66 Cuda. The waterpump pulley and crank pulley doesn't line up and more they interfere with each other.
The engine got the waterpumphousing with passengerside water outlet.
Now I need to buy new pulleys.
Does any of you guys have info on which pulleys I should look for.
Many thanks in advance, Lenny aka Swedefish
 
Does it have a 70-up water pump? Is so here is what you'll need. Not saying you need to buy these new ones but at least use them for the looks and measurements
pulley3.jpg


pulley2-1.jpg


May as well get the proper alt bracket too.


pulley1-1.jpg
 
The OP says he has the water pump with the passenger side outlet, by which I think he means it has the passenger side INLET from the radiator. Edit: Ooops wrong info deleted...

Swedefish, do you have pictures of your pulleys that you can post here? Or can you tell us if the water pump housing is iron, or is it aluminum? If you have the 1970 and later pulleys, then it might be easier to buy the right water pump.
 
Last edited:
Thanks guys.
The housing is made off aluminum.
Here are some pics off what I got.
Don't know how this could've run before

IMG_0080.JPG


IMG_0081.JPG


IMG_0084.JPG
 
swedefish said:
I've got this 360 LA engine in my -66 Cuda. The waterpump pulley and crank pulley doesn't line up and more they interfere with each other.
The engine got the waterpumphousing with passengerside water outlet.
Now I need to buy new pulleys.
Does any of you guys have info on which pulleys I should look for.
Many thanks in advance, Lenny aka Swedefish
Click to expand...


Mopar, Dodge, Chrysler Small Block Pulleys
 
You must log in or register to reply here.
-

Back
Top