blue missile
Well-Known Member
Has anyone put a modern rear axle in an A body and what are the specs on the current crop of axles say from a magnum?
Andrew
Andrew
> Over on "Granny's Speed Shop" webb site, is a feature of 3k lb. Gen III RX 7, Turbo sbf. with 998hp/1,200 ftlb. torque. Stock rear/LSD(7" ring gear), lasted down to 9.03 et's in the 1/4. Turbo in 93-95, has 8" ring and all-gear posi. Nice modular set-up. Looks like good potential. ateam.:glasses9:I'd bet the LX rear setup will be much too wide for an A-Body.
Guy on Moparts did a T-Bird IRS. That seemed to work pretty good. I've see one start on a late 80's Supra IRS, but as far as I know he didn't get any farther than buying the stuff and test fittting things.
> Over on "Granny's Speed Shop" webb site, is a feature of 3k lb. Gen III RX 7, Turbo sbf. with 998hp/1,200 ftlb. torque. Stock rear/LSD(7" ring gear), lasted down to 9.03 et's in the 1/4. Turbo in 93-95, has 8" ring and all-gear posi. Nice modular set-up. Looks like good potential. ateam.:glasses9: