Quarter panels

-
D

Duster2022!

Well-Known Member
Joined
Sep 30, 2022
Messages
291
Reaction score
37
Location
indiana
I am finding that whole quarter panels for the Duster and Demon is being discontinued. They are offering these partial ones now.
Just curious if anyone has welded one in yet ?

IMG_8554.png
 
If they are Goodmark, the quality is not the best (from my experience), but they are better than nothing. Strictly my opinion......A pro may have something else to say.
 
Those are 3/4 panels and have been around for a long time. Too bad to see the AMD is no longer going to offer them. The market is slowing down as prices keep going up. That and there are not as many cars that need quarters like there were.
 
Guess someone should have done it to my my Demon I just bought. It sat for years till I bought it now I am finding out quarters are almost impossible to get
 
Syleng1 said:
Those are 3/4 panels and have been around for a long time. Too bad to see the AMD is no longer going to offer them. The market is slowing down as prices keep going up. That and there are not as many cars that need quarters like there were.
Click to expand...
AMD is not offering full quarter replacements, they are offering the replacement skins not the complete quarter that goes up the the quarter to the seam between roof and quarter
 
I bought my last set 1year ago from an AMD dealer. Sad to see them go. That’s all.
 
Duster2022! said:
I am finding that whole quarter panels for the Duster and Demon is being discontinued. They are offering these partial ones now.
Just curious if anyone has welded one in yet ?

View attachment 1716095608
Click to expand...
These quarters you questioned about fit over the original quarter , I have a set here. So if you hold them on your car centered in the wheel house they extend past the door and beyond the end of the quarter in the rear. Also they do not have the bumper indent as seen in the picture. Also the gas cap hole depth is incorrect. Just a warning. They should be used as a patch not a full quarter replacement.

The 72-73 Duster full quarter replacement panels from AMD also have issues with the fuel cap depth. I ended up installing a 72 fuel neck tube and 72 cap on this Demon and installing the 70-71 marker indent frames. AMD are not perfect but with the correct tools and knowledge you can get them in place.

100_0054.JPG


100_0055.JPG


100_0056.JPG
 
Duster2022! said:
Ya thanks, I need both dides
Click to expand...
Most likely they will stamp out a batch of the other side at some point. I would contact one of the suppliers I posted above maybe get on a waiting list. They don't keep large quantities in warehouses anymore due to inventory cost. Kramer who I listed above they actually have some AMD panels in their inventory where as most vendors do a ship straight from AMD warehouse.
 
Oldmanmopar said:
These quarters you questioned about fit over the original quarter , I have a set here. So if you hold them on your car centered in the wheel house they extend past the door and beyond the end of the quarter in the rear. Also they do not have the bumper indent as seen in the picture. Also the gas cap hole depth is incorrect. Just a warning. They should be used as a patch not a full quarter replacement.

The 72-73 Duster full quarter replacement panels from AMD also have issues with the fuel cap depth. I ended up installing a 72 fuel neck tube and 72 cap on this Demon and installing the 70-71 marker indent frames. AMD are not perfect but with the correct tools and knowledge you can get them in place.

View attachment 1716095694

View attachment 1716095695

View attachment 1716095696
Click to expand...
That’s funny if you read the description about the skins, the day they wrap around the door post and wrap around the Tailight section. You have any pics holding the skin up to the car?
 
You must log in or register to reply here.
-

Back
Top